PC Components - Cases

A case of attitude
The vividly colored motherboard plates, drive trays and exterior accents create a fresh, expressive feel

A hidden compartment
Two neatly concealed 5.25” bays with storage drawer and magnetic cover

Openly expressive
The easy-to-clean front mesh acts as a dust filter while allowing high airflow

Flexible storage support
- Two ultra-versatile storage trays each support a 3.5” and a 2.5” drive simultaneously. A dedicated SSD bracket for 2x 2.5” is also included
- Easy cable management with multiple tie-down points, pre-mounted cable ties and convenient extra-large pass-through holes

Show off your build
- Easily mounted tempered glass side panel lets you showcase your components. (TG models only)
- Holds radiators up to 280 mm in the front, 240 mm in the top and 120 mm in the rear
- The honeycomb patterned front mesh creates a striking visual effect that gives the Pop series a premium feel

North reimagines the gaming PC, introducing natural materials and bespoke details to make gaming a stylish addition to the living space. Fusing design and airflow engineering, the case features fine-patterned mesh ventilation and an open front with real walnut or oak panels. The design is complemented by sleek brass or steel details and an integrated tab for easy access to the top of the case. Inside, North offers an intuitive interior layout and generous compatibility.

Natural design
- Enjoy a sophisticated looking case which integrates effortlessly into your living space
- Enhance your gaming station with a real oak or walnut front, a faux leather tab and sleek steel or brass details

Type-C interface
Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps

Gaming ready
- Support radiators up to 240 mm in the top and 360 mm in the front
- Room for a GPU up to 355 mm with front fans installed or up to 300 mm with a front radiator
- Seven bridgeless expansion slots allow for extensive customization
- Designed for ATX / mATX / ITX motherboards

Easy access
Remove the side panels, unclip the front and pop off the top panel using an integrated tab

Ventilated performance
- Natural ventilation through an open front and a stylishly integrated mesh top panel
- The mesh version of the case features a full mesh side panel in addition to the top

Flexible storage
North features two included combined 3.5″/2.5″ drive mounts and two dedicated 2.5″ drive mounts out of the box

Build versatility
- Make the most of your building experience with an intuitive interior layout
- Two Aspect 14 PWM fans preinstalled with room to expand up to a total of four 140 mm or six 120 mm fans
- The mesh version also ships with a fanhub and a fan bracket, providing an additional two fan positions

REFRESH YOUR STYLE

Redesigned Magnetic Dust Filter
The redesigned dust filter keeps your PC breathing easy with a refreshed patterned design.

USB 3.2 GEN2x2 (20Gbps) SUPPORTED
USB 3.2 Gen 2x2 Type C port built into the I/O panel with data transfer speeds up to 20Gbps.

Excellent Thermal Performance
The open design of the perforated front, top, and bottom guarantees excellent thermal performance.

Clean Routing Space
28mm of space behind the motherboard tray allow for easy and hidden cable management.

Multiple Positioning Options
The case can be put in vertical or horizonal position.

Edge To Edge Tempered Glass Side Panel
Show off your build through the 4mm-thick tempered glass side panel, easily installed with thumbscrews.

Fan and Radiator Support
The front supports up to two 140mm fans and up to a 240mm radiator. The rear supports a 120mm fan or radiator and the top two 120mm fans. All to ensure you don't have to compromise on performance.

Components Clearance
The Q300L V2 case supports CPU coolers up to a height of 159mm, graphics cards up to a length of 360mm, and power supplies up to a length of 160mm.

• Q300L V2 | Refresh your style

North XL combines a transformative take on the gaming PC case with a generous form factor. It fuses design materials with airflow engineering, to make performance gaming a stylish addition to the living space. Inside, it boasts a spacious, flexible, and intuitive interior layout so you can make the most of your building and gaming experience.

Slick and streamlined
- Compact yet roomy interior makes the most of mATX with high space efficiency and robust component support
- Room for GPUs up to 306 mm long including front fans with 331 mm total space
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support

Detachable front filter
- Front panel design with hinged removable mesh filter and tether-free bezel for easier access to front fan mounts
- Double layered front filter with detachable nylon for increased airflow

Refined airflow
- The open interior layout creates a smooth airflow path from intake to rear exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 1x 140 mm Dynamic X2 GP fans included)

Bolt-free glass
Seamless, top-latching tempered glass panels make for a stylish exterior

All access
- The fully removable top panel and fan bracket offers excellent interior access and easy cable routing
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access

More in store
- Flexible storage options with two HDD/SSD drive trays and four dedicated SSD mounts (2 brackets included)
- Integrated cable guides with cable straps further simplify cable management behind the board

Type-C Interface
USB Type-C front I/O offers quick access to fast charging and speeds up to 10 Gbps

Exquisitely Ruthless
MasterBox TD500 Mesh V2’s iconic polygonal design keeps your system looking unique and your gaming sessions streamlined.

FineMesh Performance Front Panel
Polygonal FineMesh features a 3D contour and is also capable of simultaneously providing high airflow and dust filtration.

Available in both Black & White colorations
MasterBox TD500 Mesh V2 is available in both black and white so you can choose the color that best matches your setup!

Three CF120 ARGB Fans Included
Pre-installed CF120 ARGB fans provide ample airflow, ensuring low temperatures, high performance, and eye-catching aesthetics during even the most intense gaming sessions.

USB 3.2 Gen 2 Type C Support
USB 3.2 Gen 2 Type C port built into the I/O panel allows multi-purpose, streamlined data transmission.

ARGB/FAN HUB Included
The included controller allows users to manage systems lighting independently from the hardware configuration and provides the user with 4 additional fan headers in case of need.

Removable Top Panel
The top panel is entirely removable for improved access during assembly and ease of mounting of cooling solutions.

Tool-Free Crystalline TG Side Panel
Featuring a crystalline tempered glass side panel, completely toolless for quick access to the internals.

Versatile Cooling Options
Support for up to seven 120mm fans and 360mm front and top radiator support ensure that performance is not compromised.

PSU Shroud With Removable Cover
MasterBox TD500 Mesh V2’s removable PSU cover allows users to freely decide whether to showcase or keep their PSUs hidden.

Hardware Compatibility
MasterBox TD500Mesh V2 is natively compatible with ITX, M-ATX and ATX motherboards.

North reimagines the gaming PC, introducing natural materials and bespoke details to make gaming a stylish addition to the living space. Fusing design and airflow engineering, the case features fine-patterned mesh ventilation and an open front with real walnut or oak panels. The design is complemented by sleek brass or steel details and an integrated tab for easy access to the top of the case. Inside, North offers an intuitive interior layout and generous compatibility.

Natural design
- Enjoy a sophisticated looking case which integrates effortlessly into your living space
- Enhance your gaming station with a real oak or walnut front, a faux leather tab and sleek steel or brass details

Type-C interface
Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps

Gaming ready
- Support radiators up to 240 mm in the top and 360 mm in the front
- Room for a GPU up to 355 mm with front fans installed or up to 300 mm with a front radiator
- Seven bridgeless expansion slots allow for extensive customization
- Designed for ATX / mATX / ITX motherboards

Easy access
Remove the side panels, unclip the front and pop off the top panel using an integrated tab

Ventilated performance
- Natural ventilation through an open front and a stylishly integrated mesh top panel
- The mesh version of the case features a full mesh side panel in addition to the top

Flexible storage
North features two included combined 3.5″/2.5″ drive mounts and two dedicated 2.5″ drive mounts out of the box

Build versatility
- Make the most of your building experience with an intuitive interior layout
- Two Aspect 14 PWM fans preinstalled with room to expand up to a total of four 140 mm or six 120 mm fans
- The mesh version also ships with a fanhub and a fan bracket, providing an additional two fan positions

Built to maximize cooling potential straight out of the box, the Torrent comes with a brand-new component layout and two custom-made 180 x 38 mm Dynamic PWM / Prisma RGB fans. The Torrent is a perfect fit for anyone serious about high-end cooling – with or without a custom water loop.

Top-tier airflow
- Designed for exceptional performance at controlled sound levels with included fan hub
- The 38 mm thick blades leverage power, size, and thickness for massive air-moving capacity
- Streamlined through and through for component breathing room and superlative airflow

Let your system breathe
- New layout with expansive base intakes and extra-large bottom fan support offers exceptional GPU cooling
- Optional front and bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow
- Streamlined open interior provides plenty of breathing room for components and maximizes performance potential for both air and water cooling

Next level GPU cooling
Expansive base intakes and extra-large bottom fan support

Streamlined inside and out
- Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator and fan sizes
- Both front and bottom panel can support extra-thick radiators and push-pull fan configurations up to 420 mm
- Seven bridgeless expansion slots allow for extensive customization

Quick start, clean finish
- Comes with external cable straps for tidying up behind your computer
- New, pre-installed Nexus 9P Slim PWM fan hub
- Removable top bezel and cable guides with cable straps make for easy installation and cable management
- Two sturdy steel drive trays with vibration-damping rubber grommets for smooth, quiet and reliable operation
- Four dedicated SSD brackets included

Included GPU support bracket
Helps your GPU stay level (user assembled, instructions included)

Transparently easy
- Seamless tempered glass panels (on TG models) with bolt-free top-latching mechanisms for easy handling
- Integrated support for a water-cooling reservoir on the motherboard tray

The new Meshify 2 is a classic evolved with focus on distinctive design, spacious interior and rugged good looks.

Detachable front filter
- New front nylon filter that can be removed for increased airflow
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans

Superlative storage
- Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included)
- Transformable interior design utilizing a movable wall for enhancing custom builds
- The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount
- Tool-less, top-latching side panels allow quick access while preventing accidental drops

Extremely flexible
- Fits your custom water loop with large reservoirs and radiators up to 420 mm in the default Open Layout
- Support for radiators up to 360 mm (front), 420 mm (top) and 280 mm (base)
- Easily holds large motherboards up to and including 285 mm E-ATX

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C Interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

The Define 7 is the latest pinnacle of the renowned Define series, setting a new standard for what you should expect from a mid-tower case when it comes to modularity, flexibility and ease of use.

Introducing the Define 7 series
Re-defining versatility
Open and interchangeable
Swap in the ventilated panel to add three filtered fan positions; remove the entire top to build and route with zero hindrance.

Superior airflow by design
Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans.

- Impressive cooling capacity with a total of nine 140 mm or 120 mm fan mounting positions
- Easy-to-clean high airflow nylon filters with full PSU coverage and convenient front access
- The single 5.25” ODD bay can be converted to an additional 140 mm front fan mount with filtered louver covering.

Open layout for massive headroom
You’ll find more than enough space for your custom water loop with large reservoirs and radiators up to 420 mm in the default Open Layout.

- Adaptable dual-layout interior design fits large motherboards up to 285 mm E-ATX
- Support for radiators up to 360 mm in front, 420 mm up top, or 280 mm in the base

6 SSD/HDD trays + 2 SSD brackets + 1 Multibracket included
Superlative storage
Convert to Storage Layout and install up to 14 HDDs alongside four dedicated SSDs mounts

- 6 universal HDD/SSD brackets included with 14 positions total in Storage Layout
- 2 dedicated SSD brackets included with 4 positions total
- Versatile Multibracket converts any unused fan position to an HDD, SSD or pump mount
- Sturdy new HDD cage design with vibration damped trays

Exceptionally silent
Silence-optimized construction with industrial sound-damped front, top, and side panels

Cable management
Integrated cable guides with Velcro ties simplifies cable management behind the board.

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans.

Type-C interface
Five front USB ports including one USB 3.1 Gen 2 Type-C with fast charging and speeds up to 10Gbps.

Versatile new Multibracket
The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount.

North XL combines a transformative take on the gaming PC case with a generous form factor. It fuses design materials with airflow engineering, to make performance gaming a stylish addition to the living space. Inside, it boasts a spacious, flexible, and intuitive interior layout so you can make the most of your building and gaming experience.

North XL combines a transformative take on the gaming PC case with a generous form factor. It fuses design materials with airflow engineering, to make performance gaming a stylish addition to the living space. Inside, it boasts a spacious, flexible, and intuitive interior layout so you can make the most of your building and gaming experience.

Meshify strikes an aggressive pose in the Fractal Design lineup with unparalleled cooling performance and a defiant new look. Like black diamond facets, the angular asymmetry of the Meshify C Mini – Dark TG carves a space uniquely its own as a new force in high-airflow design. Tempered glass with a distinctive tint completes the stealth-inspired black-on-black aesthetic with exceptional style.

A compact yet spacious open Micro ATX layout creates an unrestricted airflow path from front intakes directly through key components to exhaust, ensuring heat is never an issue.

The Meshify C Mini – Dark TG has a remarkably compact footprint with the high-end component support of a larger tower, and with six fan mounts and multi-radiator liquid cooling capability, it has the cooling capacity to match.

When performance is top priority and compromise is not an option, Meshify has you covered in style.

The new Meshify 2 is a classic evolved with focus on distinctive design, spacious interior and rugged good looks.

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C Interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

A case of attitude
The vividly colored motherboard plates, drive trays and exterior accents create a fresh, expressive feel

A hidden compartment
Two neatly concealed 5.25” bays with storage drawer and magnetic cover

Openly expressive
The easy-to-clean front mesh acts as a dust filter while allowing high airflow

Flexible storage support
- Two ultra-versatile storage trays each support a 3.5” and a 2.5” drive simultaneously. A dedicated SSD bracket for 2x 2.5” is also included
- Easy cable management with multiple tie-down points, pre-mounted cable ties and convenient extra-large pass-through holes

Show off your build
- Easily mounted tempered glass side panel lets you showcase your components. (TG models only)
- Holds radiators up to 280 mm in the front, 240 mm in the top and 120 mm in the rear
- The honeycomb patterned front mesh creates a striking visual effect that gives the Pop series a premium feel

Stylish, smart and sophisticated
Design fuses with function in a case that offers both aesthetics and flexibility

A hidden compartment
Two neatly concealed 5.25” bays with storage drawer and magnetic cover

Keeping it down
Excellent noise reduction thanks to the closed front and top, bitumen side panels and sound-damping foam

Flexible storage support
- Two ultra-versatile storage trays each support a 3.5” and a 2.5” drive simultaneously. A dedicated SSD bracket for 2x 2.5” is also included
- Enjoy multiple tie-down points, pre-mounted cable ties and extra-large pass-through holes for a clean interior

Show off your build
Easily mounted tempered glass side panel (TG versions only) lets you showcase your components

Aspect fans
Comes with three 120 mm Aspect 12 fans pre-installed, featuring Trip Wire technology and rifle bearings for enhanced blade efficiency and reliable cooling performance

A case of attitude
The vividly colored motherboard plates, drive trays and exterior accents create a fresh, expressive feel

A hidden compartment
Two neatly concealed 5.25” bays with storage drawer and magnetic cover

Openly expressive
The easy-to-clean front mesh acts as a dust filter while allowing high airflow

Flexible storage support
- Two ultra-versatile storage trays each support a 3.5” and a 2.5” drive simultaneously. A dedicated SSD bracket for 2x 2.5” is also included
- Easy cable management with multiple tie-down points, pre-mounted cable ties and convenient extra-large pass-through holes

Show off your build
- Easily mounted tempered glass side panel lets you showcase your components. (TG models only)
- Holds radiators up to 280 mm in the front, 240 mm in the top and 120 mm in the rear
- The honeycomb patterned front mesh creates a striking visual effect that gives the Pop series a premium feel

The Node 804 is a micro ATX chassis which focuses on cooling performance and maximum configurability, all packed in an interesting new form factor with Scandinavian elegant design.

The dual chamber layout separates hot running components from the cooler ones and allows for unrestricted airflow over the motherboard, processor and graphics card.

The case comes with three excellent 120mm fans but can be upgraded with several additional fans if needed.
Featuring plenty of options for placing water cooling components, tall heat sinks and hard drives.
The flexibility of this case really gives the users the possibility to create their optimal system build.

• Node 804 - Designed to Adapt

North reimagines the gaming PC, introducing natural materials and bespoke details to make gaming a stylish addition to the living space. Fusing design and airflow engineering, the case features fine-patterned mesh ventilation and an open front with real walnut or oak panels. The design is complemented by sleek brass or steel details and an integrated tab for easy access to the top of the case. Inside, North offers an intuitive interior layout and generous compatibility.

Natural design
- Enjoy a sophisticated looking case which integrates effortlessly into your living space
- Enhance your gaming station with a real oak or walnut front, a faux leather tab and sleek steel or brass details

Type-C interface
Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps

Gaming ready
- Support radiators up to 240 mm in the top and 360 mm in the front
- Room for a GPU up to 355 mm with front fans installed or up to 300 mm with a front radiator
- Seven bridgeless expansion slots allow for extensive customization
- Designed for ATX / mATX / ITX motherboards

Easy access
Remove the side panels, unclip the front and pop off the top panel using an integrated tab

Ventilated performance
- Natural ventilation through an open front and a stylishly integrated mesh top panel
- The mesh version of the case features a full mesh side panel in addition to the top

Flexible storage
North features two included combined 3.5″/2.5″ drive mounts and two dedicated 2.5″ drive mounts out of the box

Build versatility
- Make the most of your building experience with an intuitive interior layout
- Two Aspect 14 PWM fans preinstalled with room to expand up to a total of four 140 mm or six 120 mm fans
- The mesh version also ships with a fanhub and a fan bracket, providing an additional two fan positions

Despite its extremely small outer dimensions, the Core 1100 mATX case provides everything you need. The stylish, Scandinavian exterior design is matched by the fully painted interior, complete with the signature white details of Fractal Design. The case is optimized for airflow with a straight cooling path, and comes equipped with a pre-installed 120mm fan. The front panel is equipped with dust filters. An innovative vertical hard drive bracket can fit either two 3.5" drives, three 2.5" drives, or one drive of each size. Both the 3.5" drive slots come with silicone vibration dampening grommets

Brushed aluminum    
Brushed aluminum-look front panel with a sleek, three-dimensional textured finish
    
1x120 mm fan included    
One Fractal Design 120 mm fan included 

Smart HDD Bracket    
Innovative vertical HDD bracket, which can hold two 3.5" drives or three 2.5" drives, or one drive of each size

A case of attitude
The vividly colored motherboard plates, drive trays and exterior accents create a fresh, expressive feel

A hidden compartment
Two neatly concealed 5.25” bays with storage drawer and magnetic cover

Openly expressive
The easy-to-clean front mesh acts as a dust filter while allowing high airflow

Flexible storage support
- Two ultra-versatile storage trays each support a 3.5” and a 2.5” drive simultaneously. A dedicated SSD bracket for 2x 2.5” is also included
- Easy cable management with multiple tie-down points, pre-mounted cable ties and convenient extra-large pass-through holes

Show off your build
- Easily mounted tempered glass side panel lets you showcase your components. (TG models only)
- Holds radiators up to 280 mm in the front, 240 mm in the top and 120 mm in the rear
- The honeycomb patterned front mesh creates a striking visual effect that gives the Pop series a premium feel

Experience performance with a fresh perspective. The H6 Flow's innovative compact design emphasizes GPU cooling with a strategically angled front corner, so the fans direct air where it's most needed. The panoramic glass proudly showcases the interior, while the dual-chamber layout frees up space for a cleaner look and better cooling performance

A SEAMLESS SHOWCASE
Tempered glass front and side panels offer an uninterrupted view of components, while the dual-chamber design hides PSU and storage for a sleek, compact, and standout look

ANGLED AIRFLOW
The angled front-right corner with 3 x 120mm fans targets heat-prone components. Supports 2 x 140mm fans beneath the GPU for optimal cooling while perforated panels enhance airflow.

BUILDING MADE SIMPLE
H6 Flow's intuitive design makes building a breeze. Wide channels and included straps aid cable management. Tool-less access to top and side panels simplifies tinkering and upgrading.